新形势下普通高校大学生行为管理模式研究

高校是培养人才的摇篮,肩负着科教兴国、人才强国两大历史性战略任务。由于社会环境的复杂化,人际关系的交错性,新时代的大学生行为状况给高校学生管理工作带来了新的挑战。针对新时期大学生行为特点,我们通过加强党建工作、强化学风建设、做好班级自主管理和深化社会服务四个方面工作进行分析,提出了全面引导、约束、规范和优化大学生的行为的建议和对策,从而有效解决新形势下普通高校学生管理工作的实际困难。     

Study on maximum power point tracking of photovoltaic array in irregular shadow

Traditional maximum power point tracking (MPPT) methods can hardly find global maximum power point (MPP) because output characteristics curve of photovoltaic (PV) array may have multi local maximum power points in irregular shadow, and thus easily fall into the local maximum power point. To address this drawback, Considering that sliding mode variable structure (SMVS) control strategy have such advantages as simple structure, fast response and strong robustness, and P&O method have the advantages of simple principle and convenient implementation, so a new algorithm combining SMVS control method and P&O method is proposed, besides, PI controller is applied to reduce system chattering caused by switching sliding surface. It is applied to MPPT control of PV array in irregular shadow to solve the problem of multi-peak optimization in partial shadow. In order to verity the rationality of the proposed algorithm, the experimental circuit is built, which achieves MPPT control by means of the proposed algorithm and P&O method. The experimental results show that compared with the traditional P&O algorithm, the proposed algorithm can fast track the global MPP, tracking speed increases by 60% and the relative error decreased by 20%. Moreover, the system becomes more stable near the MPP, the fluctuations of output power is greatly reduced, and thus make full use of solar energy.     

冷轧平整机机前甩尾轧制工艺的开发与应用

本文介绍了柳钢冷轧板带厂1550 mm单机架平整机机前甩尾轧制的工艺。改进前轧制每卷钢卷生产效率低,钢卷成材率低,改进后生产效率、成材率明显提高,部分规格的钢卷能实现带尾剪切长度为零。     

Improving CNC contouring accuracy by robust digital integral sliding mode control

Integral sliding mode control (ISMC) has been employed and shown to improve contouring accuracy in the presence of external disturbances and model uncertainties. An ISMC controller directly reduces the tracking errors of each individual axis, thereby reducing the overall contour errors indirectly. An ISMC controller drives the system dynamics back onto the sliding surface if there exists a deviation from the predefined surface. In the design of an ISMC controller, it is crucial to choose an appropriate sliding surface as this has a great impact on system performance and on chattering. In current approaches, the sliding surface is chosen largely based on a rule of thumb which is only applicable for systems with open-loop poles having imaginary parts. In this paper, an approach is presented to design the sliding surface using principles of robust digital control so that both the regulation and robustness requirements can be satisfied. The natural frequency of the dominant closed-loop poles is chosen such that the modulus of the output sensitivity function lies within the robustness bounds. Resonant pole-zero filters are then used to reshape the output sensitivity function in specific frequency regions. Experiments showed that when the modulus of the output sensitivity function is kept within the robustness bounds, chattering can be avoided and the contour errors resulting from vibrations can be reduced. The introduction of a resonant pole-zero filter also allowed the attenuation band to be expanded so that the low frequency components of the contour errors are attenuated.     

Validation of an integral sliding mode control for optimal control of a three blade variable speed variable pitch wind turbine

Reduction in cost of wind energy requires most efficient control technology which can able to extract optimum power from the wind. This paper mainly focuses on the control of variable speed variable pitch wind turbine (VSVPWT) for maximization of extracted power at below rated wind speed (region 2) and regulation of extracted power when operating at above rated wind speed (region 3). To extract maximum power at below rated wind speed torque control is used whereas to regulate rated power at above rated wind speed pitch control is used. In this paper a nonlinear control i.e. integral sliding mode control (ISMC) is proposed for region 2 whereas a conventional proportional–integral (PI) control is adapted for region 3 of a VSVPWT. The proposed controller is combined with modified Newton Raphson (MNR) wind speed estimator to estimate the wind speed. The stability of the proposed ISMC is analyzed using Lyapunov stability criterion and the control law is derived for region 2 which is also adapted for the transition period between region 2 and region 3 (region 2.5). The dynamic simulations are tested with nonlinear FAST (Fatigue, Aerodynamics, Structures, and Turbulence) wind turbine (WT). The simulation results of ISMC are presented and the control performance is compared with conventional SMC and existing controllers such as aerodynamic torque feed forward control (ATF) and Indirect speed control (ISC). It is seen that especially in region 2.5, ISMC gives better performance compared to all other controllers.     

影像设备OM测试法解读(能源之星2.0版)

美国能源之星对影像设备能效测试2.0版操作模式功率法(OM法)主要反应被测样品在完成准备状态、睡眠状态、低耗能状态或关闭状态的能耗情况。分析了OM法的各测试项目以及相应指标,归纳总结了该标准规范在实施中应注意的问题,对影像设备附加功能进行了详细说明。     

A new design strategy for DC/DC LLC resonant converter: Concept,modeling, and fabrication

In this paper, a new design procedure for LLC converter has been introduced. In fact, this method is a computer-based design algorithm based on a numerical technique. In the process of designing, the value of the resonant element is obtained by solving the LLC converter fundamental equation. This converter will be controlled by using state feedback, such as output voltage variable. As a matter of fact, in a control system, the change of output voltage (because of load variation) will affect the switching frequency, so the output voltage will be tuned. In the designing process, the fundamental equations of LLC converter are obtained, and the value of the resonant elements is calculated. Also, a comparison analysis is carried out between the proposed and typical methods. The simulation is done to investigate the validity of the proposed method. Moreover, a prototype is manufactured, and the experimental test is done to evaluate its applicability.     

企业开展矿山修复业务的几点思考

目前,中国矿山生态修复中存在诸多历史遗留问题。国家着手推动矿山治理和生态修复,已经取得了一些成效,但仍存在资金需求缺口大,修复后矿山土地使用确权、土地流转、开发利用等方面的问题。从国家政策支持、治理资金出资模式等方面对矿山修复进行了思考。     

基于数字化、共享化背景下财务管理模式创新研究与实践

介绍了山东能源集团财务管理数字化转型的背景,阐述了该集团新型数字化、共享化财务管理模式的建设路径。通过不断探索财务理念和管理实践的创新,以及新型数字化和财务共享管理模式的建设,该集团实现了财务管理模式的转型升级,助力企业实现数字化、智慧化转型。     

Interval analysis of mode shapes to identify damage in beam structures

Various damage detection methods have been proposed by several researchers in the past few decades. Amongst them, the efficiency of mode shapes in detecting damage has been demonstrated by many researchers when further processed. In most cases, the processing involves expansion or reduction of the mode shape data. However, vital information that are damage-prints are often lost during processing of the mode shape data. In addition, most of these processes involve long and complex computation, thus, leading to inaccurate damage identification. In this study, a simple and fast damage identification technique is proposed to identify damage in beam structures. Interval analysis is applied to the mode shapes of a beam structure in the damaged and undamaged states. The interval situations of each of the beam's segment via mode shape are derived to obtain the upper and lower bounds and the derived bounds are compared. To establish a relationship for identify the damaged point, a possibility of damage existence is defined for each segment of the beam structure. The mode shape increment is defined as the increase in the mode shape value. Furthermore, a damage measure index that provide enhance damage information is obtained as the product of the possibility of damage existence and mode shape increment. A numerical model of a simply supported steel beam is applied to demonstrate this method by imposing damage through thickness reduction of elements in segments. In addition, a parametric analysis is carried out to evaluate noise effect by considering varying damage severities and different noise levels. The results showed that this method is simple and provides considerable accurate results.